← Back to manual home

Cyclic Timer Settings Menu

Use this menu to edit the cyclic timer values that control repeated ON/OFF timing.

Screen layout

Cyclic Timer Settings Menu
> On Time <
  On Time Unit
  Off Time
  Off Time Unit
  Number of Cycles
  Trigger Mode
  Trigger Edge
  Lock Input During Run
  Exit

What you can edit

On Time / Off Time: numeric field input.
On Time Unit / Off Time Unit: choose ms, s, or Min.
Number of Cycles: zero means infinite cycles.
Trigger Mode: Manual or External.
Trigger Edge: Rising or Falling.
Lock Input During Run: block trigger/reset changes while the timer is busy.

Editing rules

Field input example
Title: On Time
Value: 0005
Turn  = change current digit
Short = move right
K0    = move left
Hold  = save and return

Short press the encoder to enter the selected field.
Encoder medium/long press saves the current field and returns.
PIN_KEY0 short moves left one position.
PIN_KEY0 medium/long saves and returns.

Saving behavior

Changes always affect the running timer immediately.
If Auto Save Profile is Yes, the active profile is updated immediately too.
If Auto Save Profile is No, use Save Profile later to keep the new values.